XXD129A01 3BHE012436R0001 PEC800-BP -1

XXD129A01 3BHE012436R0001 PEC800-BP -1 A 20-foot extension cable with locking connectors is a standard option for connecting SureStep motors to 2-phase microstepping drives. The cable can be easily cut to the proper length if desired. The drive can operate any of the four standard motors and has standard +5 VDC optically isolated logic inputs for interfacing with DirectLOGIC PLCs and many other third-party controllers/indexers. 9-position DIP switches are used to set up the drive; no software or additional resistors are required for configuration. DIP switches are used for built-in self-tests, stepping angle selections, current level selections, and optional DIP switches for built-in self-test, step angle selection, current level selection, and optional idle current reduction.

XXD129A01 3BHE012436R0001 The PEC800-BP-1 drive uses advanced microstepping technology with selectable step sizes of 400 steps per revolution (divided by 2), 1,000 steps per revolution (divided by 5), 2,000 steps per revolution (divided by 10), and 10,000 steps per revolution (divided by 50). 2-phase bipolar motors have 200 full steps per revolution or 1.8 degrees per full step. A standard 32 VDC, 4 amp linear power supply completes the SureStep line. The power supply can run at least two SureStep stepper systems of any size and comes with an auxiliary +5 VDC regulated power supply for easy interface with DirectLOGIC PLCs and stepper motor drives.