IS200AEPAH1BKE

The IS200AEPAH1BKE is capable of switching 50 amp single phase AC loads at 660 volts under 4-32VDC signal control. Its internal current sensing circuitry monitors and reacts to many load failure conditions, and the RJCS alarm function can be set locally or remotely from a standard PLC. Internal over-temperature and over-current protection is standard and the RJCS can be ordered with the usual NPN or PNP turn on or off alarm outputs.The RJCS has an integrated heat sink that simply secures it to a DIN rail.The RJCS solid state relay is designed for industrial heating equipment where monitoring and prevention of load failure is required. The RJCS can monitor, report locally (LED), remotely (PLC) and react to the following line faults: partial or full load faults: by pressing the “teach” membrane button or remotely by sending a signal from the PLC controller to set the required full load current.

IS200AEPAH1BKE Features:
– Improved communication via AS-Interface (AS-I), CAN open, Ethernet or MOBUS bridge.
– New CAN open expansion module (TWDNCO1M)
– Macro Control Transmission (Altivar).
– Embedded Ethernet communication port on 40I/O Compact Controller or via connector
– TwidoPort module (499TWD01100).
– Two ways to program TWOO controllers, Ethernet or Bluetooth