DSPC454 57310303-F3

The DSPC454 57310303-F3 can be set up for automatic configuration via the TwinCAT automation interface. This interface, which was already common in TwinCAT 2, has been greatly expanded in TwinCAT 3.1. PLC and C++ code can now be generated and compiled automatically, and the system configuration can be modified according to the available hardware. matlab/Simulink modules can be added to the project and configured automatically. All this can be done without human intervention. The automation interface can be used by different scripting languages such as IronPython and Microsoft PowerShell and linked to a C++ application or any .NET application.TwinCAT 3.1 has also been enhanced with Matlab/Simulink support.

The DSPC454 57310303-F3 supports MODBUS/TCP, PROFINET and Ethernet/IP industrial protocols. It supports the IEEE 802.11 a/b/g/h/n WiFi standard (2.4 / 5 / 5.4 GHz), with a maximum data rate of 108 Mbps in Super A/G mode and 100 mW output power.The M340-WC can be connected directly to the M340 CPU (Slave Mode), or even to the M340 NOE (Master Mode), in order to support the distributed I/O and I/O scanner modes. The range of coverage (LOS) is 300 m, and up to 5 Km with a high-gain directional antenna.The M340-WC is powered by +24VDC on the M340 backplane and is limited to a power consumption of 3.5 W. In addition, the module is hot-swappable during operation to simplify maintenance.