8421-CC-PS

The 8421-CC-PS recognizes overloads and selectively shuts down faulty machine components. As a result, the system remains controllable, errors can be bypassed, severe damage can be prevented, or the system can be shut down in a controlled manner. Even capacitive loads of up to 20,000 μF do not pose a challenge, because the module powers them and protects them in a controlled manner. For professional system monitoring and visualization, each PXS24 channel has its own control inputs and outputs that can be connected to a PLC. this makes it easier to locate the source of an error and correct the problem. the PXS24’s channels can also be easily linked to each other to generate group messages or to set up and shut down multiple channels in the event of a failure. the PXS24’s channels can also be connected to a PLC in the event of a failure. the PXS24’s channels can also be connected to a PLC in the event of a failure.

The 8421-CC-PS module is a standalone device that operates across a variety of platforms. The module also seamlessly connects and integrates with Rockwell Automation’s Allen Bradley devices. The module can operate in Logix “own” or standalone mode. In standalone mode, the module can be configured and connected to an Ethernet network to accurately synchronize devices using 1588 PTP and NTP. Through the Logix connection, the input and output components will provide timing, positioning, and diagnostic information that will be available in the Logix controller environment in addition to the PTP and NTP services. The module uses an on-board GPS receiver to provide accurate time and location information. Because the module is self-contained and connects to a variety of devices via Ethernet, it can be placed as close to the antenna as possible, eliminating the need for expensive low-loss coaxial cable.