REXROTH VT-HNC100-1-22W-08-C-0

The REXROTH VT-HNC100-1-22W-08-C-0 has function block programming, which is a major advantage. If you are not familiar with function block programming, it is one or more lines of code behind a single interface. The interface can perform operations such as handling manual and automatic operation of valves. Function block programming saves a lot of time and redundant programming. Modules Through technologies such as open source communications, fiber optics, and Ethernet, many PLCs can now communicate with each other and act as autonomous PLCs, communicating with other autonomous controllers over a network.

REXROTH VT-HNC100-1-22W-08-C-0 communication allows single or multiple processes controlled by one PLC to communicate with another PLC. A connected PLC system can have nearly the same safety and robustness as a DCS, whereas a single PLC is a single point of failure, so you wouldn’t want to control an entire plant with a single PLC. The module’s panel drive is UL 508A compliant and has a short circuit current rating (SCCR) of 65 kA. It is designed as a virtual replacement for the Reliance Electric FlexPak 3000, which is commonly used in the steel and pipe mill industries, as well as in extruders and many other applications. Since ABB’s acquisition of Baldor Electric, which sold the FlexPak 3000 for many years, the DCS800-EP is expected to gain wider acceptance as the FlexPak continues to be in the “legacy” phase of its life cycle.